Decorative Lighting Systems

Many Decorative Lighting systems are available for a whole range of applications. They are characterised by the having a large number of low wattage lamps to form a decorative line. They are often used to highlight the outline of an object.

Tubelite

High quality 24 volt, 1watt lamps are housed inside a UV stabilised polycarbonate tube. The tube can have several profiles including:

Lamp spacing chosen depends somewhat on the application. As a general rule, the closer the viewer is to the Tubelite, then the closer together the lamps should be.

Tubelite is suitable for "chasing" and can be supplied in either a single circuit or 4-circuit configuration. Lightmoves is able to provide a suitable "chaser".

Tubelite can be used either internally or externally. It can be used to highlight awnings, windows, food counters, entrances, etc.

Tubelite can also be used to highlight a stair edge, and is commonly used in cinemas and theatres for this purpose. A custom extrusion is available which fits over the leading edge of stairs and houses the Tubelite.

Snakelite

Snakelite is suitable for "chasing" and can be supplied in either a single circuit or 4-circuit configuration. Lightmoves is able to provide a suitable "chaser".

Snakelite is suitable for internal use only. The highly flexible nature of the tube allows Snakelite to be used in a wide variety of applications where highlighting is required for even complex shapes. The nature of Snakelite is such that it can be easily draped over, or wrapped around, various objects that are to be adorned.

Budlite

High quality 24 volt, 1 watt lamps are installed in nylon housings that are vertically mounted on a flexible clear plastic-covered conductor ribbon. Lamp spacing is 50mm or 100mm.

Budlite is suitable for "chasing" and can be supplied in either a single circuit or 4-circuit configuration. Lightmoves is able to provide a suitable "chaser".

Budlite is suitable for internal use only. The highly flexible nature of the conductor ribbon allows Budlite to be used in a wide variety of applications where highlighting is required to outline even complex shapes. It is easily mounted using double sided tape or adhesive aluminium mounting clips. Applications include outlining signs, beams, archways and ceiling details. Budlite is very effective in highlighting architectural or structural details.

Coloured lamps are also available to further enhance the flexibility of the product. It is a simple matter to change lamps (and lamp colours) whenever required.

Horizontal Mini-Lights

High quality 24 volt, 1 watt lamps are installed in nylon housings that are horizontally mounted on a flexible clear plastic-covered conductor ribbon. Standard lamp spacing is 100mm or 200mm, with other spacings available on request.

Horizontal Mini-Lights has a very low profile (6mmH x 7mmW) which allows it to be used where unobtrusive lighting is required. It can be installed in the tube used for Tubelite to produce an alternative to that product. Various aluminium extrusion profiles are available to house Horizontal Mini-Lights for applications such as stair edges and display cases.

Horizontal Mini-Lights is suitable for internal use only. The highly flexible nature of the conductor ribbon allows it to be used in a wide variety of applications where highlighting is required to outline even complex shapes.

Coloured lamps are also available to further enhance the flexibility of the product. It is a simple matter to change lamps (and lamp colours) whenever required.

Britestrip

Britestrip is a highly versatile linear lighting system, which utilises proprietary sockets mounted on a flat cable. The sockets can house either festoon lamps or accept a special gimble that allows MR11 dichroic lamps to be used.

Festoon Lamps

The festoon lamps are 24 volt 10 watt Xenon with a lamp life of 15,000 hours. They provide an even, linear light source that can be used for:

MR11 Lamps

The MR11 lamps are 12 volt 20 watt Halogen with a lamp life of 3,000 hours. They offer flexibility of aiming and greater highlighting of particular objects. They can be used for:

Lamp spacing can be selected depending on requirements, and variable lamp spacing on the one cable can be accommodated. However MR11 and Festoon lamps cannot be used on the one cable. Up to 48 Festoon, or 24 MR11 lamps can be used on the one cable.

Cliplite / Wedgelite

Cliplite and Wedgelite are both highly flexible lighting systems that comprise moulded polycarbonate lamp housings that are pressed onto a stranded wire cable. The subsequent connection is gas-tight and weatherproof, and suitable for external or interior installation. Both systems utilise safe 24 volt power and have their lamps wired in parallel. Caps, housing and cables are all UV stabilised.

The major difference between Cliplite and Wedgelite is the wattage (and therefore brightness) of the lamps - Cliplite uses 1 watt lamps, and Wedgelite uses 3 watt lamps.

Cliplight

Cliplite utilises 24 volt, 1 watt lamps, and has been used extensively for tree illumination, where two basic techniques are employed. The Cliplite is run along the major branches and trunk of the tree, giving an outline of the tree in light; or flurries of Cliplite are installed within the foliage to give a sense of groups of fireflies dancing.

Cliplite is also used to outline various built structures such as awnings, signs, arches, bridges etc.

Since this product is manufactured by Lightmoves, custom lamp spacing is available on request. Lamp spacing chosen depends somewhat on the application. As a general rule, the closer the viewer is to the Cliplite, then the closer together the lamps should be.

Wedgelite

Wedgelite utilises 24 volt, 3 watt lamps and has gained wide acceptance for architectural use in shopping malls, cinemas and theatre lobbies. It is also used to highlight structures in parks, street decoration, and for decorating signs.

Since this product is manufactured by Lightmoves, custom lamp spacing is available on request. Lamp spacing chosen depends somewhat on the application. As a general rule, the closer the viewer is to the Wedgelite, then the closer together the lamps should be.

Wedgelite also supports 40mm diameter decorative spheres which are available in Clear, White, Red, Amber, Blue, and Green.

Stargazer / Startracker

Stargazer and Startracker are linear lighting systems that comprise a moulded polycarbonate lamp housing that is pressed onto a stranded wire cable, and then has a polycarbonate decorative sphere fixed over the lamp housing. The connection is weatherproof, and suitable for external or interior installation. Both systems utilise safe 24 volt power and have their lamps wired in parallel. The spheres, housing and cables are all UV stabilised.

The major difference between Stargazer and Startracker is the size of the decorative spheres -

The spheres are available in Clear, White, Red, Amber, Blue, and Green. The lamps are 5 watt, with a life of 30,000 hours.

Since this product is manufactured by Lightmoves, custom lamp spacing is available on request. Lamp spacing chosen depends somewhat on the application. As a general rule, the closer the viewer is to the lighting system, then the closer together the lamps should be.

Stargazer and Startracker have gained wide acceptance for architectural use in shopping malls, cinema and theatre lobbies, particularly where a larger, brighter fitting is required. The increased size helps the festoon effect to be prominent in situations where it might otherwise be obscured.

Stargazer and Startracker are also used as street and shop-front decoration, and for decorating signs.