Lightmoves Pty Ltd
Dynalite
Dynalite DBC410 hf ballast controller

For control of fluorescent and low voltage lighting in a DyNet® energy management system (Formerly the DTK 925CE)

DBC410 formerly the DIMTEK 925CE Applications in which the DBC410 has successfully been used include:
  • Office Towers
  • Clubs
  • Snooker Hall
  • Retail Merchandising
  • Museums
  • Water Features
    		•
  • Airports
  • Convention Centres
  • Lecture Theatres
  • Art Galleries
  • Robotic Animation

    •  
    The DBC410 is a 4 channel controller suitable for use with electronic dimmable fluorescent ballasts, either 0-10V or DSI. It also includes 4 heavy duty 10A relay outputs to switch fluorescent lighting or other loads in a DyNetŪ energy management system.

    In an office environment, the DBC410 can be programmed to adjust the lighting level to within workplace regulations. Lighting levels can be kept constant throughout the day, thereby improving worker productivity and saving energy. As part of a larger lighting control network, lights are turned off automatically in unoccupied areas after hours.

    The DBC410 is particularly suited for applications requiring precise workspace lighting levels. Using the DyNetŪ universal sensor, the light output can be automatically adjusted to compensate for changing ambient light levels. In a flight control tower environment, radar screen contrast is kept constant using this method.

    The DBC410 is often used as a 4 channel, 10A per channel relay controller. It can be used to control water valves, motors and a variety of switched devices.

    Features


    Supply 230/110V, 50/60Hz single phase at 40A
    Outputs 4 x Switched outputs at 10A or
    4 x Control outputs selectable to 0­10V DC or DSI
    Protection 4 x Single pole 10A breakers
    Regulating Device Relay - 12A nom., 120A surge
    Control DyNetŪ network control
    12 button keypad interface
    4 x 0-5V/0-10V DC fader inputs
    Join input, 0V = No Join, 5V = Join
    Panic input, 0V = Panic, 5V = No Panic
    Fade Times 0-10 seconds via internal potentiometer
    0-20 minutes for each DyNetŪ message
    Preset Scenes 96 internal, selectable preset scenes
    Compliance CE Compliant
    EN50081
    EN50082
    AS3548
    Ambient Temp 40°C Max
    Construction Alloy/Steel wall mount case with epoxy finish
    Dimensions Height 315mm x Width 205mm x Depth 70mm
    Weight 4 Kilograms

    Specifications and options subject to change without notice.

    Download the brochure (PDF file, 98KB)


    *contact Lightmoves


    <   Back to the Dynalite page    ^  Lightmoves Home page
    Last Updated: Saturday, 3 May 2003
    Tel (03)9701 2500   Fax (03)9701 2511
    This page was crafted by the WebWrangler