Dynalite DMC805

Dynalite DMC805 leading edge dimmer & HF ballast controller

For controlling mixed loads, economically and with space efficiency.(Formerly DTK805)

Applications in which the DMC805 has successfully been used include:

Boardrooms
Lecture Theatres
Retail Merchandising
Residential
Video Conferencing Rooms
Schools

The DMC805 offers control of both incandescent lamps and electronic dimmable ballasts. A 20A breaker protects 4 channels rated at 5A each for control of incandescent loads. Another 20A breaker protects 4 channels, which connect to electronic dimmable ballasts, where any one channel can be loaded to a maximum of 10A. Both 0-10V and DSI ballasts can be controlled.

The DMC805's mixed load capability is further enhanced by its cost effectiveness and compact space requirements. Being a single enclosure, the initial capital cost is reduced, as are the installation costs. The DMC805 also allows for future changes in lamp technologies.

The DMC805 is the ideal choice for boardrooms. It can be controlled directly using any of the Dynalite accessories, or fully integrated into an audio visual control system supplied by a third party.

In residential applications, considerable cost economies are achieved through the mixed load capacity. In combination with Dynalite's wide range of control products, the DMC805 provides a technical advance in creating the home of the future. The DMC805 has been designed as the solution for small areas of mixed lighting loads.

Features

4 x 5 Amp dimmed outputs (leading edge)
4 x 10 Amp switched outputs (20A total); and
4 x 0-10VDC or DSI control outputs (100mA sink or source)
Suitable for most types of Incandescent, selected Neon and Low Voltage Loads
Suitable for most types of 0-10V and DSI high frequency fluorescent ballasts and low voltage transformers
TV8 rated relays with AgSnIn contacts
Soft start, surge limiting and voltage regulation lamp protection features
96 scene EEPROM memory
Fully compatible with DyNet® network control
Wide choice of user control panels and other peripherals
Panic/Fire alarm inputs
CE mark European approvals

Specifications

Supply	230V, 50/60Hz single phase at 40A
Outputs	4 x Dimmed outputs at 5A 4 x Switched ouputs at 10A (total 20A)
Protection	2 x Single pole 20A circuit breakers
Regulating Device	Triac - 600V, 40A nom., 315A surge
Switching Device	Relay - 12A nom., 120A surge
Interference Suppression	Iron powder toroidal choke
Rise Time	200mS at 230V
Control	DyNet® network control Panic input, 0V = Panic, 5V = No Panic
Fade Times	0-20 seconds via internal potentiometer 0-20 minutes for each DyNet® message
Serial Port	RS485 unterminated
Preset Scenes	96 internal, selectable preset scenes
Compliance	CE Compliant
Ambient Temp	40°C Max.
Construction	Alloy/Steel wall mount case with epoxy finish
Dimensions	Height 450mm x Width 225mm x Depth 70mm
Weight	6 Kilograms