LED Controllers
DLEDC401 4 channel (RGBW) Voltage-mode LED Controller
DLEDC60035 6 channel Current-mode LED Controller
DLEDC48 48 channel (RGB) LED Controller
The DDLEDC401 is designed to control four channel (RGBW) LED loads in decorative architectural lighting applications where creative colour mixing and sequencing is required. The controller provides four pulse width modulated voltage mode outputs suitable for driving high intensity LED sources. Controller nominal output voltage is 24VDC and can optionally be ordered as 12V output. The device is available in two output configurations to accommodate common anode (DDLEDC401-CA) or common cathode (DDLEDC401-CK) loads. The device is supplied with a DIN rail mountable housing, designed for installation installed within a switchboard or suitable electrical enlosure. The DDLEDC401 is DMX512 compatible and is suitable for the high chase speeds found in display lighting.
| Specifications | |
Supply |
230V 50/60Hz single phase & neutral at 130 Watts 120V input optionally available (-IN120) |
| LED Outputs | 4 x 1A (nominal) voltage mode Maximum per channel load 4A Maximum total box load 4A Outputs are short circuit protected 12V output optionally available (-OUT12) DDLEDC401-CA Output - 24V common anode DDLEDC401-CK Output - 24V common cathode |
| Maximum Total Box Load | 100 Watts at 24V output 50 Watts at 12V output (-OUT12 version) |
| Control Inputs | 1 x RS485 DyNet/DMX512 serial port |
| User Controls | Service switch Diagnostic LED |
| DyNet DC Supply | 100mA (supply for approx. 5 Smart Panels) |
| Preset Scenes | 96 |
| Supply Terminals | Phase, Neutral, Earth 1 x 4mm2 max conductor size |
| Output Terminals | CH, COM for each channel 1 x 4mm2 max conductor size |
| Diagnostic Functions | Device Online/Offline status (DLight, DTK600 Touch Screen or BAS interface is required for displaying and analysing diagnostic data). |
| Compliance | CE, C-Tick |
| Operating Environment | 0° to 40°C ambient temperature 0% to 95% RH non condensing |
| Construction | ABS DIN Rail enclosure (12 unit) |
| Dimensions | H 86mm x W 209mm x D 66mm |
| Weight | Packed weight 1.0kg |
| Load Compatibility | Voltage mode LED fixtures |
| Options | 120V input -IN120 |
| 12V output -OUT12 | |
The DDLEDC60035 is designed to control LED loads in decorative architectural lighting applications where creative
colour mixing and sequencing is required. The controller provides six pulse width modulated current mode outputs
suitable for directly driving 350mA nominal current rated high intensity LED sources. Incorporating internal current
regulation the controller is designed to directly operate series connected LED arrays without the need for any additional
circuit devices. The device is supplied with a DIN rail mountable housing, designed for installation within a switchboard
or suitable electrical enclosure. The DDLEDC60035 is DMX512 compatible and is suitable for the high chase speeds
found in display lighting.
| Specifications | |
Supply |
18-32VDC 2.5A Regulated |
| LED Outputs | 6 x 350mA current mode Minimum internal voltge drop 0.5V Outputs are short circuit protected Integral self resetting thermal overload protection |
| Maximum Power Dissipation | 6 Watts combined total for consecutive pairs of channels (Ch 1&2, Ch 3&4, Ch 5&6). 4 Watts per individual channel. 18 Watts Box Total Pd = (Vs - (Vdf x n)) x 0.35 Pd = Power dissipation per channel Vs = Supply voltage Vdf = Diode forward voltage n = Number of diodes in series per channel |
| Maximum Supply Voltage | Vs max = 8.5 + (n x Vled) or 32VDC, whichever is the lesser Vs max = Maximum supply voltage n = Number of diodes in series per channel Vled = LED forward voltage |
| Minimum Supply Voltage | Vs min = 4 + (n x Vled) or 18VDC, whichever is the greater Vs min = Minimum supply voltage n = Number of diodes in series per channel Vled = LED forward voltage |
| Control Inputs | 1 x RS485 DyNet/DMX512 serial port |
| User Controls | Service switch Diagnostic LED |
| DyNet DC Supply | 100mA (supply for approx. 5 Smart Panels) |
| Preset Scenes | 170 |
| Supply Terminals | Positive, Negative, Earth 1 x 4mm2 max conductor size |
| Output Terminals | CH, COM for each channel 1 x 4mm2 max conductor size |
| Diagnostic Functions | Device Online/Offline status (DLight, DTK600 Touch Screen or BAS interface is required for displaying and analysing diagnostic data). |
| Compliance | CE, C-Tick |
| Operating Environment | 0° to 40°C ambient temperature 0% to 95% RH non condensing |
| Construction | ABS DIN Rail enclosure (12 unit) |
| Dimensions | H 86mm x W 209mm x D 66mm |
| Weight | Packed weight 1.0kg |
| Load Compatibility | Current mode LED fixtures |
The DLEDC48 is a 48 channel LED dimmer that was designed for dimming 16 fittings of RGB LED's. The DLEDC48 contains a constant current source in the dimmer, and pulse width modulates the current signal to adjust the intensity of the LED fitting. The LED's are connected to the fitting using an RJ11 connector.
| Specifications | |
| Number of Channels | 48 |
| Output per channel | 50mA |
| Output Voltage | 47CDC* |
| Input Voltage | 35VAC* |
| Dimensions | Height 450mm x Width 205mm x Depth 70mm (as for DTK902) |
| Load Connection | RJ11 Socket |
* This is the standard voltage. The actual voltage can be changed to suit a specific project.
contact
Lightmoves
Back to the Dynalite page 
Lightmoves Home page