Low Voltage Profiles and Spotlights

Series II

LV- ZW/T
	Beam Angle:	26°	40°
	Width at 4m	1.7m	2.9m
	Width at 7m	3.0m	4.9m
	Lux at 4m	275	105
	Lux at 7m	90	35
	Power:	30/70W
	Transformer:	Integral
	Weight:	1.1kg
	Length:	325mm
	Cross-section:	63mm

LV- ZW/NT
	Beam Angle:	26°	40°
	Width at 4m	1.7m	2.9m
	Width at 7m	3.0m	4.9m
	Lux at 4m	275	105
	Lux at 7m	90	35
	Power:	30/70W
	Transformer:	Remote
	Weight:	0.7kg
	Length:	275mm
	Cross-section:	63mm

LV- SP/T
	Beam Angle:	Per Lamp
	Power:	30/70W
	Transformer:	Integral
	Weight:	0.4kg
	Length:	175mm
	Cross-section:	63mm

LV- SP/NT
	Beam Angle:	Per Lamp
	Power:	30/70W
	Transformer:	Remote
	Weight:	0.4kg
	Length:	130mm
	Cross-section:	63mm

LV- SP/TAVA
	Beam Angle:	Per Lamp
	Power:	30/70W
	Transformer:	Remote
	Weight:	0.2kg
	Length:	80mm
	Cross-section:	63mm

PROFILE FEATURES

• Beam Shaping and Image Projection capabilities using standard or custom Gobos
• Extended Lamp Life of upto 4000 hrs
• Re-designed Shutter Assemblies
• Electronic Transformers
• Gear Housing is inter-changeable with Spots
• Light-weight for reduced mounting Loads
• Recessed Dichroic Filter space
• Double air-gap between Lamp and Transformer housing
• Inclusive Accessories: Beam Shapers
• Track Mounting
• Custom Colours
• Standard E size Gobos

LAMP (Bulbs)

• Lamp selection is quite critical and to achieve maximum all-round performance we recommend that only the types nominated below be used. Use of other Lamps will most likely result in uneven beam quality together with poor focus.
• OSRAM 50W 46870SP 10° 3K TITAN DECO STAR
• OSRAM 65W 46880SP 10° 3K TITAN DECO STAR
• LAMP BASE: GX5.3 Base

SPOT FEATURES

• Electronic Transformers
• Light-weight for reduced mounting Loads
• Gear Housing is inter-changeable with Profile
• Lens Tubes
• Recessed Dichroic Filter space
• Double air-gap between Lamp and Transformer housings
• Track Mounting
• Custom Colours

GENERAL FEATURES

OSRAM HALOTRONIC ELECTRONIC TRANSFORMERS

are used in the units equipped with Integral Transformers and meet all Australian and European EMC requirements. Short-circuit protection is provided and they are compatible with leading-edge phase control dimmers for inductive loads. (no need for special trailing edge dimmer)

A DOUBLE AIR-GAP BETWEEN THE LAMP AND TRANSFORMER

housings provides reduced operating temperatures for the Lamp, Lamp-holder &Transformer, which translates to extended operating life and reduced likelihood of paint discolouration.

MAINTENANCE

Lamps are accessible without tools. Lampholders & Transformers are also easily accessed and can be replaced within minutes using screwdrivers only.

BODY CONSTRUCTION

Luminaire bodies are built using aluminum extrusions and high press9ure die castings, for light-weight, robust performance with excellent heat dissipation characteristics.

contact Lightmoves

  Lightmoves Home page

Last Updated: Thursday, 10 February, 2000
Tel (03)9701 2500   Fax (03)9701 2511  info@lightmoves.com.au