Dynalite Training at Lightmoves

The Lightmoves Dynalite Education Program

Lightmoves regularly conducts training seminars in partnership with Dynalite. The training is segregated, and courses are set up as modules covering three main categories.

We offer a general overview course covering how lighting is controlled as well as how the Dynalite system operates.
Our applications modules are separated into residential and commercial topics.
The commissioning courses cover everything from basic commissioning to advanced integration. These should be done in order where applicable.

Course descriptions:
G1 Lighting Control Fundamentals / An introduction to Dynalite
P1 Basic DLight Configuration
P2 DLight Introduction to Programming
P3 DLight Intermediate Programming
P4 DLight Advanced Integration
S1 Dynalite Residential Product and System Applications
S2 Dynalite Architectural and Commercial Product and System Applications

G1 Lighting Control Fundamentals / An introduction to Dynalite

This course provides an introduction to electrical and lighting fundamentals. It covers the various methods of control applicable for different types of lighting loads and provides a comprehensive overview of Dynalite control system architecture.
Typical Trainee: Electrician, Lighting Salesman, Lighting Designer and AV Integrator.
Who will benefit from this training session? Anyone who is involved in the lighting industry and wants to improve their knowledge of lighting control.
Prerequisites: Participants require a basic knowledge of lighting loads only.
Equipment required: None.
Course duration: 2-3 hours.
Learning outcomes: By the end of this session the trainee should be able to:

Identify the correct control type required for a specific lighting load.

Explain the differences between different types of lighting control.

Design a simple Dynalite control system.

P1 Basic DLight Configuration

This is an introductory training module covering basic programming of a Dynalite lighting control system. This module uses an 8-point plan to provide each participant with the necessary skills to create and commission a scene set lighting control system.
Typical Trainee: Electrical contractor, AV Integrator, Lighting Designer.
Who will benefit from this training session? Anyone needing to carry out basic commissioning of a Dynalite control system to provide scene set control for one or more areas of lighting.
Prerequisites: Participants should have a basic understanding of the principles of operation of the Dynalite system and have basic PC skills. No previous commissioning experience is required.
Equipment required: As this course contains a number of practical assessments at least one PC notebook using Windows 95 or higher with a serial port is required between two participants. If a participant cannot obtain a PC notebook they should inform Lightmoves as early as possible.
Course duration: 1 day.
Learning outcomes: By the end of this session the trainee should be able to:

Competently use DLight software to set up a Dynalite lighting network to control one or more areas of lighting.

Follow a logical set up path to efficiently commission a project.

Program Dynalite control panels to provide individual area preset scene control.

Modify preset scenes to match the client’s requirement.

Create an End User document detailing the set up of a project.

P2 DLight Introduction to Programming

This course outlines the operations required to create programming scripts. It also looks at a number of specific Dynalite products from a programming perspective.
Typical Trainee: Electrical Contractor, AV Integrator.
Who will benefit from this training session? Anyone with a good working knowledge of the Dynalite system set up and operation wanting to provide a higher level of control functionality.
Prerequisites: Participants must have previous experience using DLight software. Previous completion of Training Module P1 (Basic DLight Configuration) or evidence of prior learning is required.
Equipment required: Each participant is required to bring a PC notebook using Windows 95 or later, to allow installation of the latest version of DLight. The PC will need to have a serial port. All practical exercises are carried out using one computer between two people. If a participant cannot obtain a PC notebook they should inform Lightmoves as early as possible.
Course duration: 1 day.
Learning outcomes: By the end of this session the trainee should be able to:

Competently configure the Universal Sensor for IR, PE and PIR control.

Create one shot and sequential logic tasks in a Universal Panel.

Interpret DyNet messages for faultfinding and task creation.

P3 DLight Intermediate Programming

This session introduces a number of the more powerful features of the DLight programming system. It also looks at a number of specific Dynalite accessory products from a programming perspective.
Typical Trainee: Electrical Contractor, AV Integrator.
Who will benefit from this training session? Dynalite Programming Engineers who are looking to further develop their understanding of the DLight software and it’s operation.
Prerequisites: Participants must have previous experience using DLight software. Completion of Training Modules P1 and P2 (Basic DLight Configuration and DLight Introduction to Programming) or evidence of prior learning is required.
Equipment required: Each participant is required to bring a PC notebook using Windows 95 or later, to allow installation of the latest version of DLight. The PC will need to have a serial port. All practical exercises are carried out using one computer between two people. If a participant cannot obtain a PC notebook they should inform Lightmoves as early as possible.
Course duration: 1 day.
Learning outcome: By the end of this session the trainee should be able to:

Design and construct a complete Time clock task file.

Configure the DyNet watchdog feature.

Commission join and area link functionality into a project and understand when to use each method.

Create pathway lighting using a number of different programming methods.

P4 DLight Advanced Integration

This course will enable experienced DLight programming engineers to customise and configure a Dynalite control system to match client’s exact requirements.
Typical Trainee: Electrical Contractor, AV Integrator.
Who will benefit from this training session? Experienced technicians looking to further improve knowledge and skill levels. Skills learned, such as writing complex tasking programs, are equally suited to residential and commercial projects.
Prerequisites: Participants must be capable of competently programming a Dynalite lighting control system and creating sequential tasks using a Universal Panel. Prior completion of Training Modules P1, P2 and P3 (Basic DLight Configuration, DLight Introduction to Programming and DLight Intermediate Programming) or evidence of prior learning is required.
Equipment required: Each participant is required to bring a PC notebook using Windows 95 or higher to allow the latest version of DLight to be installed. The PC must have a serial port. All practical exercises are carried out using a notebook computer. If a participant cannot obtain a PC notebook they should inform Lightmoves as early as possible.
Course duration: 1 day.
Learning outcomes: By the end of this session the trainee should be able to:

Configure a network bridge for any application.

Create fully functional Tasks using conditional logic.

Debug complex Tasks.

Design structured code for efficient operation.

S1 Dynalite Residential Product and System Applications

This module is intended to assist people involved in residential lighting applications. It introduces the Lightstyle range of intelligent home automation products, and outlines functional requirements applicable in residential applications. Defines proven methods to scope and design a control system for home user requirements.
Typical Trainee: M&E Consultants, Lighting Designers, AV Integrators, Electrical Contractors, Electricians.
Who will benefit from this training session? People who require the knowledge and skills necessary to competently specify and design a Dynalite residential lighting system.
Prerequisites: Participants should have some appreciation of residential lighting requirements.
Equipment required: None
Course duration: 1 day.
Learning outcomes: By the end of this session the trainee should be able to:

Specify and design a residential lighting control system.

Provide the client with alternative solutions based on functionality and cost.

Design a Dynalite control system line diagram from a reflected ceiling plan.

S2 Dynalite Architectural and Commercial Product and System Applications

This course is designed to assist anyone involved in architectural lighting applications. The module provides instruction on how to create lighting control solutions to enhance environmental aesthetics and covers typical application requirements for hotels, function rooms, museums, galleries, and retail showrooms. The course also addresses building automation and energy management solutions for commercial installations, including shopping centres and office towers. It outlines control network considerations and integration possibilities with other systems used in commercial applications.
Typical Trainee: M&E Consultants, Lighting Designers, AV Integrators, Electrical Contractors, Electricians.
Who will benefit from this training session? People who require the knowledge and skills necessary to competently specify and design a Dynalite commercial lighting system for architectural applications.
Prerequisites: Participants should have a working knowledge of architectural lighting loads and a rudimentary knowledge of the operation of DyNet. Preferably having completed Module G1 (Lighting Control Fundamentals / An Introduction to Dynalite).
Equipment required: None
Course duration: 1 day.
Learning outcomes: By the end of this session the trainee should be able to:

Design a control system solution for any architectural lighting control application.

Provide users with different solutions based on functionality and cost.